Has anyone had any threading problems on their 3 in 1 machine? I am having problems threading as the existing threads that I have cut are being cut away on proceeding passes. I chucked a piece of HRS in the lathe chuck which extends about 1 1/2 inches from the face. I took a skim cut to make sure the stock was round. Set up the compound at 29 1/2 degrees, made sure that the cutter was square to the work and chuck. Marked the stock with an indicator mark to see if stock was slipping in...
Problems threading on a 3 in 1 machine
Problems threading on a 3 in 1 machine